If you’re a fan of the letterman jacket and would like to keep it in pristine condition, then it’s time to learn how to clean your favorite item. The best way to clean your school varsity jacket is through laundering, which involves washing an item with detergent and cold water. You can also use hot water if you prefer; just let that part of the process cool down before continuing on with the rest of this guide!
Remove Patches and Pins
Remove any patches or pins from the jacket. If you’re unable to remove them, cover them with tape.
Once you’ve removed the jacket from its hanger, it’s time to get rid of any stains. For this step, you can use a stain remover spray or pen. The label on the bottle will tell you what type of chemical is included in this product and how much should be applied for best results. You may also want to try using one of these other products:
- Stain Stick (available at most hardware stores)
- Stain Removal Cream/Cream Stick (available online)
- Gel-based stains (available online)
Wipe the Suede Elbow Pads
Once you’ve cleaned the jacket, wipe it down with a damp cloth. Use a dry cloth to dry the jacket and elbow pads. Do not use any cleaning products on this part of your letterman jacket because they can damage it over time and make it look worn out before you even wear it! If your letterman jacket becomes dirty or smelly, wash it only in cold water (below about 60 degrees) with mild soap.
Wash the Letterman Jacket
The first step to cleaning a letterman jacket is to wash it in the washing machine. You can use cold water and gentle detergent, but don’t use fabric softener or tumble dryers. Also, don’t iron your jacket when you’re done washing it because that will make the fabric deteriorate even faster. If you want to be extra safe and prevent bleeding onto your letterman jacket’s buttons, keep all of your other clothes separate from this item when doing laundry so they don’t get contaminated too!
Air Dry the Jacket
If your letterman jacket is made of material other than 100% wool jacket, it’s best to air dry it. This will reduce the chance that the fibers will be damaged by heat and moisture. If you don’t have a clothesline or drying rack on which to hang your jacket, hang the sleeves up in a safe place like above your bathroom sink so they won’t get too wet while they’re drying out. You could also use a towel rack in front of a window if there isn’t one available near where you live (if there are no windows close by).
Make sure not to put this product in any type of washer/dryer because doing so may cause irreparable damage such as shrinking or fading caused by heat exposure during normal operation; however, this item can be machine washed using cold water only without bleach added since some bleaches may cause discoloration over time depending upon how often used an item may become dirty over time depending upon how often used an item may become dirty over time depending upon how often used an item may become dirty over time
Iron Jacket Inside Out
When you iron your jacket, you want to make sure that the fabric is protected. To do this, simply iron it inside out—this will prevent any damage from happening and prevent the fabric from getting burnt. You can use a steam iron on areas such as collars and cuffs if they’re not too delicate or if they’re made of leather. However, when using an iron with a steam function (which is usually more expensive), make sure to test it on a small area first before using it on your entire jacket because sometimes these irons can be tricky!
Stick Patches, Badges, and Pins
Now that your jacket is all ready for repair, it’s time to stick on the patches, badges, and pins.
- Use a warm iron to press them into place. Do not use an overly hot iron, or you may damage the fabric of your jacket beyond repair.*
- Protect your letterman’s jacket with a soft cloth as you apply the patches and pins. This will keep them from getting scratched while they’re being applied.*
- Hold each pin in place by using a pin cushion—a small dish filled with water or other liquid (like toothpaste) that holds your pins upright while they dry after application.* Make sure that each side of each pin is straight before pressing down on it; if one side curves more than another, use pieces of tape to secure both sides flat against each other until dry.* Don’t forget: remove any excess glue before washing!
How to Care Your Letterman Jacket
Now that you’ve learned how to wash a letterman jacket, here are a few tips for keeping your jacket in great shape:
- Wash and dry it inside and out. This will keep any dirt or oil from getting trapped behind the buttons or other areas of your jacket where it can cause stains.
- Remove badges and pins before washing. You don’t want any of those badges or pins getting wet during washing! If they do get wet, then just let them sit for 30 minutes before putting them back on again. It’s important that you do this because otherwise there may be some damage done to these items when cleaning happens later on down the road (like breaking off parts of them).
The letterman jacket is one of the most iconic pieces of clothing you can wear in school. It’s a tradition that goes back to your childhood and has been passed down for generations, so it’s important that you take care of your jacket so it lasts long enough for you to pass it on!